5 Reasons Why Electric SUVs Are Perfect for the Modern Urban Explorer

The Tiggo Cross CSH is a modern hybrid SUV that combines a gasoline engine and an electric motor in Chery’s advanced Super Hybrid system. It’s an ideal choice for drivers who seek the perfect balance between powerful performance and maximum fuel efficiency.

However, many hybrid car owners still don’t fully understand how to manage fuel consumption effectively. The combination of a gasoline engine and an electric motor often leads to confusion, when the electric power is in use, when the gasoline engine takes over, and how to utilize both efficiently.

Thanks to the modern features embedded in the Tiggo Cross CSH, drivers can easily save fuel without sacrificing comfort or performance. Therefore, understanding how to optimize fuel efficiency in the Tiggo Cross CSH is essential to ensure the hybrid system operates at its best.

Here are some fuel-saving tips for the Tiggo Cross CSH that you can apply to keep your fuel costs low.

1. Use the Driving Mode According to Road Conditions

The Chery Tiggo Cross CSH is equipped with two main driving modes—Eco and Sport—which can be adjusted based on road conditions and driving style. The Eco mode is specifically designed to maximize fuel efficiency by prioritizing the use of electric power.

Eco mode operates when the vehicle is moving at low speeds or in heavy traffic, such as on city roads. In this mode, the gasoline engine will only activate when additional power is needed, helping to reduce fuel consumption and lower emissions.

The hybrid system in the Tiggo Cross CSH automatically manages the balance between the electric motor and gasoline engine to maintain efficiency without sacrificing comfort. Additionally, the smoother throttle response in Eco mode helps drivers maintain steady acceleration and prevent unnecessary fuel usage.

2. Avoid Warming Up the Engine by Idling

In hybrid vehicles like the Chery Tiggo Cross CSH, warming up the engine by idling for an extended period is no longer necessary. When the car is started, the electric motor immediately activates and helps the system reach optimal operating temperature without wasting fuel.

Idling to warm up the engine actually reduces fuel efficiency, as the gasoline engine runs without contributing to vehicle movement. Instead, simply start the car and drive at a low speed, allowing the hybrid system to naturally adjust to the proper working temperature.

3. Avoid Sudden Acceleration or Braking

Driving habits have a major impact on fuel efficiency in hybrid vehicles like the Tiggo Cross CSH. Sudden acceleration and hard braking force the hybrid system to work harder because the gasoline engine must activate more frequently to provide extra power. This, of course, leads to higher fuel consumption.

To maintain efficiency, drivers are advised to keep a steady speed and accelerate smoothly so the electric motor can operate longer before the gasoline engine engages. With controlled driving behavior, the Tiggo Cross CSH can perform more efficiently and consume less fuel overall.

4. Maintain Proper Tire Pressure According to Manufacturer’s Recommendations

Keeping tire pressure at the manufacturer’s recommended level is one of the most effective fuel-saving tips for the Tiggo Cross CSH. Underinflated tires create greater rolling resistance against the road surface, forcing the engine to work harder and burn more fuel.

To stay efficient, always ensure that tire pressure matches the recommended specification. Check tire pressure regularly, especially before long trips or when there are significant changes in temperature. With optimal tire pressure, the Tiggo Cross CSH can achieve better fuel efficiency and maintain driving comfort.

5. Optimize the Use of Efficiency-Supporting Features

The Tiggo Cross CSH is equipped with various advanced features designed to enhance fuel efficiency, such as regenerative braking, auto start-stop, and an energy monitoring system displayed on the MID screen. The regenerative braking feature converts energy generated during braking into electricity to recharge the battery, ensuring that no energy goes to waste.

Meanwhile, the auto start-stop system automatically shuts off the gasoline engine when the car comes to a temporary stop and restarts it once the accelerator pedal is pressed, helping to save fuel during idle periods.

Through the MID display, drivers can also monitor how energy is distributed between the gasoline engine and the electric motor, allowing them to adjust their driving style accordingly. By understanding and utilizing these advanced features of The Tiggo Cross CSH, you can drive the Tiggo Cross CSH more efficiently and manage energy use wisely.

6. Use the Air Conditioner Efficiently

Excessive air conditioner use can directly affect fuel consumption, even in hybrid vehicles like the Tiggo Cross CSH. When the AC operates at maximum cooling, the system draws additional power from the battery or the gasoline engine to maintain a cool cabin temperature.

Therefore, it’s important to use the AC wisely to help improve fuel efficiency. Also, make sure to keep the AC filter clean to ensure smooth airflow and reduce the strain on the cooling system.

7. Avoid Excessive Load and Unnecessary Accessories

Avoiding excessive load is another key step in maintaining the Tiggo Cross CSH’s fuel efficiency. Every extra kilogram of weight—whether from luggage in the trunk or on the roof, forces the engine and hybrid system to work harder, resulting in higher fuel consumption.

In addition to reducing load, it’s best to avoid unnecessary accessories such as permanent roof racks, extra lighting, or high-powered electronic devices. While these may look appealing, they can actually decrease overall energy efficiency.

Read also: 5 Advantages of The Tiggo Cross CSH That Other Cars In Its Class Don’t Have

Those were some fuel-saving tips for the Tiggo Cross CSH that you can apply. Keep in mind that the fuel efficiency of the Tiggo Cross CSH greatly depends on how you drive and maintain the vehicle. Smooth driving habits and regular maintenance help the hybrid system operate more intelligently and efficiently.

If you’re looking for a modern hybrid car that’s both eco-friendly and fuel-efficient, visit the nearest Chery dealer to experience the Tiggo Cross CSH firsthand through a test drive. You can also explore its full specifications at chery.co.id.

The Chery Tiggo 8 CSH is a modern Plug-in Hybrid Electric Vehicle (PHEV) that combines the performance of a gasoline engine and an electric motor in one advanced system. Unlike conventional vehicles, the Tiggo 8 CSH features a more complex electrical system equipped with a high-voltage battery as an additional power source.

Maintaining the Tiggo 8 CSH’s electrical and air conditioning systems is crucial because both components work together to support the performance of the hybrid system. The electrical system serves as the core that powers the electric motor, while the AC helps regulate cabin temperature and cool the battery components to ensure optimal performance.

Without regular maintenance, both systems may experience reduced efficiency, affecting energy performance and driving comfort. Therefore, if you own or plan to purchase this vehicle, here are some essential tips for maintaining the Tiggo 8 CSH’s electrical and AC systems.

How to Maintain the Electrical System of the Chery Tiggo 8 CSH

As a plug-in hybrid vehicle, the electrical system in the Chery Tiggo 8 CSH plays a crucial role in powering the electric motor and optimizing fuel efficiency. This system works by transferring energy from the high-voltage battery to the electric motor through an inverter, which converts direct current (DC) into alternating current (AC).

Within the Tiggo 8 CSH’s electrical structure, several key components must be maintained for optimal performance, including the high-voltage battery, inverter, electric motor, and Power Control Unit (PCU). To keep the vehicle’s electrical functions in top condition, here are some practical tips for maintaining the Tiggo 8 CSH’s electrical system:

• Regularly check the battery condition to ensure normal voltage levels.
• Make sure connectors and terminals are clean and free from dust or corrosion.
• Avoid overcharging, which can accelerate battery degradation.
• Use certified home or public charging stations.
• Avoid installing non-recommended electrical accessories.
• Ensure the battery cooling system works properly, with smooth fluid circulation and no leaks.

By following these maintenance steps, the Tiggo 8 CSH’s electrical system will remain efficient, safe, and capable of supporting optimal hybrid performance in the long run.

How to Maintain the Cooling and AC System of the Tiggo 8 CSH

In hybrid vehicles like the Chery Tiggo 8 CSH, the cooling system plays a crucial role in maintaining the optimal temperature of both the engine and the high-voltage battery. One of the main advantages of the Tiggo 8 CSH’s AC system lies in its dual cooling system, which is specially designed for electrified vehicles.

The AC system in the Tiggo 8 CSH not only ensures comfortable cabin temperatures but also manages air circulation and coolant flow to stabilize the temperature of electrical components such as the battery and inverter. To prevent damage and maintain the system’s durability, here are several ways to care for the Tiggo 8 CSH’s AC system:

• Use the AC wisely and avoid extreme temperature settings that burden the system.
• Clean the cabin air filter regularly to maintain proper airflow.
• Ensure the refrigerant level is adequate and that there are no leaks.
• Clean the evaporator and air ducts to prevent cooling inefficiency.
• Have the battery cooling system checked at an authorized Chery service center.

By applying these maintenance tips, you can help preserve the performance of the Tiggo 8 CSH’s AC system. A stable cooling system is essential to ensure that both the gasoline engine and electric motor operate under ideal conditions without the risk of overheating. Efficient cooling also helps extend battery life and maintain overall energy efficiency.

Signs of Electrical or Cooling System Problems

Here are several signs that Chery Tiggo 8 CSH owners should watch for as early indicators of issues in the vehicle’s electrical and cooling (AC) systems of the hybrid car:

• Electrical system warning light turns on: If warning icons such as the battery symbol, hybrid system alert, or “check engine” light appear, it may indicate a problem with electrical components such as the high-voltage battery, inverter, or power connectors.
• Reduced acceleration or sluggish power response: When the electric motor isn’t performing optimally, the car may feel heavier during acceleration. This could be due to decreased battery capacity, power control system issues, or inefficient battery cooling.
• Increased energy or fuel consumption: An inefficient electrical system causes the vehicle to rely more on the gasoline engine. As a result, fuel consumption rises, and the EV mode activates less frequently.
• Engine or battery overheating: Overheating is a strong indicator that the cooling system isn’t functioning properly. Possible causes include low coolant levels, poor circulation, or a clogged battery cooling system.
• AC not cooling or making unusual noises: If the cabin temperature remains warm even when the AC is on full power, or if you hear humming or vibrating sounds, it could signal a refrigerant leak or damage to the electric AC compressor.
• Unstable voltage or dim vehicle lights: Dim headlights, infotainment screens, or instrument panels may point to issues in the power distribution system, possibly caused by dirty connectors, a faulty inverter, or unstable battery voltage.
• Hybrid driving mode not activating: If the system cannot switch to EV Mode even when the battery is fully charged, it could mean the Battery Management System (BMS) has detected irregularities in temperature or electrical current.

Read also: How The 3 Driving Modes of Tiggo 8 CSH Work: Eco, Sport, and Normal

Maintaining the electrical system and AC of the Tiggo 8 CSH is not just about comfort, it’s also about efficiency and safety. A well-maintained electrical system helps keep the battery and electric motor performing optimally, while a clean and properly functioning AC maintains ideal temperatures for both the cabin and vehicle components.

Schedule regular inspections of your Tiggo 8 CSH’s electrical and AC systems at the nearest authorized Chery service center to ensure your vehicle always performs at its best. You can learn more about Chery’s service options by visiting chery.co.id.

The Chery Tiggo 8 CSH is a Plug-in Hybrid Electric Vehicle (PHEV) that combines a gasoline engine with an electric motor powered by a rechargeable battery. One of its key advantages lies in the three driving modes offered: Smart Mode, Initial Mode, and Force Mode.

The driving modes in the Tiggo 8 CSH are designed to provide flexibility in using electric and gasoline power depending on driving conditions. Each mode has its own characteristics and benefits tailored to the driver’s needs—whether for city driving, long-distance trips, or other situations.

Through the three selectable driving modes—Smart, Initial, and Force—drivers can enjoy a flexible and efficient driving experience. In this article, we’ll explore each Tiggo 8 CSH driving mode in detail, how they work, and the best situations to use them.

Smart Mode: Intelligently Adapting to Driving Style

This driving mode automatically adjusts the power distribution between the gasoline engine and the electric motor based on driving conditions, driving style, and battery level. Smart Mode represents the adaptive intelligence of the C-DM hybrid system, which is a key highlight of the Tiggo 8 CSH’s driving modes.

Smart Mode in the Tiggo 8 CSH is designed to balance performance and energy efficiency, allowing drivers to enjoy an optimal driving experience in various road conditions. This mode intelligently recharges the battery when it’s between 20%–80%, then switches to EV mode until the battery is fully charged.

Smart Mode is ideal for daily use or trips involving dynamic traffic conditions, such as city driving or light acceleration on highways. With intelligent power management, the system continuously monitors speed, engine load, and battery status to determine the most efficient power source at any given moment.

For example, when the vehicle is moving slowly, Smart Mode relies on the electric motor for fuel-efficient operation. When the driver accelerates to overtake or climb uphill, the gasoline engine automatically engages to provide extra power. This transition occurs seamlessly, making it nearly unnoticeable to the driver.

Initial Mode: Maximum Efficiency at Steady Speeds

Initial Mode is the energy-saving driving mode in the Tiggo 8 CSH that utilizes pure electric power from the battery without assistance from the gasoline engine. In this mode, the vehicle operates like a fully electric car (EV), as the electric motor becomes the sole source of propulsion.

The main purpose of the Tiggo 8 CSH’s Initial Mode is to optimize energy efficiency and minimize fuel consumption as long as the battery has sufficient charge. This mode is highly effective for driving at consistent speeds, such as during relaxed city commutes or cruising smoothly on highways with light traffic.

However, when the battery charge drops below a certain threshold (around 25–30%), the system automatically switches to hybrid mode to maintain stable vehicle performance. When the battery power becomes too low, the system disables battery output to prevent damage and preserve long-term battery health.

The transition from battery power to the gasoline engine occurs smoothly without disrupting driving comfort. This makes the Initial Mode of the Tiggo 8 CSH ideal for short-distance urban trips or when the driver wants to maximize the use of electric power.

Force Mode: Maximum Performance When Needed

The Force Mode of the Tiggo 8 CSH is a driving mode designed to deliver maximum performance while maintaining the battery’s power at an optimal level. In this mode, the gasoline engine actively operates to both drive the vehicle and recharge the battery up to around 80%.

Once the battery capacity reaches that level, the system automatically switches back to EV mode. Unlike Smart Mode, which adaptively manages battery charging when the charge gets low, Force Mode allows the battery to be charged while the vehicle is in motion.

The Force Mode in the Tiggo 8 CSH is especially useful for long-distance or out-of-town driving. It’s also ideal for situations that require high power and acceleration, such as overtaking on highways, climbing steep roads, or carrying heavy loads.

With Force Mode, drivers can ensure the battery always has sufficient reserve power for specific driving needs. The combination of the gasoline engine and electric motor in the Tiggo 8 CSH’s driving modes provides optimal power output without compromising efficiency.

The Importance of Driving Modes in the Chery Tiggo 8 CSH

The driving modes in the Chery Tiggo 8 CSH are intelligent systems designed to adjust the vehicle’s engine response, transmission, and power output according to the driver’s needs and road conditions. Through these modes, the vehicle can deliver a more efficient, comfortable, or powerful driving experience depending on the selected setting.

Smart Mode offers the ideal balance between the use of the gasoline engine and the electric motor automatically. Initial Mode prioritizes maximum efficiency by relying solely on electric power. Meanwhile, Force Mode delivers full performance while maintaining sufficient battery reserve for long-distance travel.

Read also: How The 3 Driving Modes of Tiggo 8 CSH Work: Eco, Sport, and Normal

The three driving modes of the Chery Tiggo 8 CSH feature intelligent functions designed to adapt to different driving needs and road conditions. These modes support efficient mobility in urban areas, long-distance trips, and even challenging terrains.

With these advantages, the Tiggo 8 CSH is the perfect choice for those seeking a modern vehicle for various driving purposes. Experience the driving modes of the Tiggo 8 CSH firsthand by scheduling a test drive at your nearest Chery dealer. You can also explore its full specifications at chery.co.id.