Driving Mode Guide for Chery Tiggo 8 CSH: When to Use Smart Mode, Initial Mode, and Force Mode?

The Tiggo Cross CSH is a modern hybrid SUV that combines a gasoline engine and an electric motor in Chery’s advanced Super Hybrid system. It’s an ideal choice for drivers who seek the perfect balance between powerful performance and maximum fuel efficiency.

However, many hybrid car owners still don’t fully understand how to manage fuel consumption effectively. The combination of a gasoline engine and an electric motor often leads to confusion, when the electric power is in use, when the gasoline engine takes over, and how to utilize both efficiently.

Thanks to the modern features embedded in the Tiggo Cross CSH, drivers can easily save fuel without sacrificing comfort or performance. Therefore, understanding how to optimize fuel efficiency in the Tiggo Cross CSH is essential to ensure the hybrid system operates at its best.

Here are some fuel-saving tips for the Tiggo Cross CSH that you can apply to keep your fuel costs low.

1. Use the Driving Mode According to Road Conditions

The Chery Tiggo Cross CSH is equipped with two main driving modes—Eco and Sport—which can be adjusted based on road conditions and driving style. The Eco mode is specifically designed to maximize fuel efficiency by prioritizing the use of electric power.

Eco mode operates when the vehicle is moving at low speeds or in heavy traffic, such as on city roads. In this mode, the gasoline engine will only activate when additional power is needed, helping to reduce fuel consumption and lower emissions.

The hybrid system in the Tiggo Cross CSH automatically manages the balance between the electric motor and gasoline engine to maintain efficiency without sacrificing comfort. Additionally, the smoother throttle response in Eco mode helps drivers maintain steady acceleration and prevent unnecessary fuel usage.

2. Avoid Warming Up the Engine by Idling

In hybrid vehicles like the Chery Tiggo Cross CSH, warming up the engine by idling for an extended period is no longer necessary. When the car is started, the electric motor immediately activates and helps the system reach optimal operating temperature without wasting fuel.

Idling to warm up the engine actually reduces fuel efficiency, as the gasoline engine runs without contributing to vehicle movement. Instead, simply start the car and drive at a low speed, allowing the hybrid system to naturally adjust to the proper working temperature.

3. Avoid Sudden Acceleration or Braking

Driving habits have a major impact on fuel efficiency in hybrid vehicles like the Tiggo Cross CSH. Sudden acceleration and hard braking force the hybrid system to work harder because the gasoline engine must activate more frequently to provide extra power. This, of course, leads to higher fuel consumption.

To maintain efficiency, drivers are advised to keep a steady speed and accelerate smoothly so the electric motor can operate longer before the gasoline engine engages. With controlled driving behavior, the Tiggo Cross CSH can perform more efficiently and consume less fuel overall.

4. Maintain Proper Tire Pressure According to Manufacturer’s Recommendations

Keeping tire pressure at the manufacturer’s recommended level is one of the most effective fuel-saving tips for the Tiggo Cross CSH. Underinflated tires create greater rolling resistance against the road surface, forcing the engine to work harder and burn more fuel.

To stay efficient, always ensure that tire pressure matches the recommended specification. Check tire pressure regularly, especially before long trips or when there are significant changes in temperature. With optimal tire pressure, the Tiggo Cross CSH can achieve better fuel efficiency and maintain driving comfort.

5. Optimize the Use of Efficiency-Supporting Features

The Tiggo Cross CSH is equipped with various advanced features designed to enhance fuel efficiency, such as regenerative braking, auto start-stop, and an energy monitoring system displayed on the MID screen. The regenerative braking feature converts energy generated during braking into electricity to recharge the battery, ensuring that no energy goes to waste.

Meanwhile, the auto start-stop system automatically shuts off the gasoline engine when the car comes to a temporary stop and restarts it once the accelerator pedal is pressed, helping to save fuel during idle periods.

Through the MID display, drivers can also monitor how energy is distributed between the gasoline engine and the electric motor, allowing them to adjust their driving style accordingly. By understanding and utilizing these advanced features of The Tiggo Cross CSH, you can drive the Tiggo Cross CSH more efficiently and manage energy use wisely.

6. Use the Air Conditioner Efficiently

Excessive air conditioner use can directly affect fuel consumption, even in hybrid vehicles like the Tiggo Cross CSH. When the AC operates at maximum cooling, the system draws additional power from the battery or the gasoline engine to maintain a cool cabin temperature.

Therefore, it’s important to use the AC wisely to help improve fuel efficiency. Also, make sure to keep the AC filter clean to ensure smooth airflow and reduce the strain on the cooling system.

7. Avoid Excessive Load and Unnecessary Accessories

Avoiding excessive load is another key step in maintaining the Tiggo Cross CSH’s fuel efficiency. Every extra kilogram of weight—whether from luggage in the trunk or on the roof, forces the engine and hybrid system to work harder, resulting in higher fuel consumption.

In addition to reducing load, it’s best to avoid unnecessary accessories such as permanent roof racks, extra lighting, or high-powered electronic devices. While these may look appealing, they can actually decrease overall energy efficiency.

Read also: 5 Advantages of The Tiggo Cross CSH That Other Cars In Its Class Don’t Have

Those were some fuel-saving tips for the Tiggo Cross CSH that you can apply. Keep in mind that the fuel efficiency of the Tiggo Cross CSH greatly depends on how you drive and maintain the vehicle. Smooth driving habits and regular maintenance help the hybrid system operate more intelligently and efficiently.

If you’re looking for a modern hybrid car that’s both eco-friendly and fuel-efficient, visit the nearest Chery dealer to experience the Tiggo Cross CSH firsthand through a test drive. You can also explore its full specifications at chery.co.id.

The Chery Tiggo 8 CSH is a modern Plug-in Hybrid Electric Vehicle (PHEV) that combines the performance of a gasoline engine and an electric motor in one advanced system. Unlike conventional vehicles, the Tiggo 8 CSH features a more complex electrical system equipped with a high-voltage battery as an additional power source.

Maintaining the Tiggo 8 CSH’s electrical and air conditioning systems is crucial because both components work together to support the performance of the hybrid system. The electrical system serves as the core that powers the electric motor, while the AC helps regulate cabin temperature and cool the battery components to ensure optimal performance.

Without regular maintenance, both systems may experience reduced efficiency, affecting energy performance and driving comfort. Therefore, if you own or plan to purchase this vehicle, here are some essential tips for maintaining the Tiggo 8 CSH’s electrical and AC systems.

How to Maintain the Electrical System of the Chery Tiggo 8 CSH

As a plug-in hybrid vehicle, the electrical system in the Chery Tiggo 8 CSH plays a crucial role in powering the electric motor and optimizing fuel efficiency. This system works by transferring energy from the high-voltage battery to the electric motor through an inverter, which converts direct current (DC) into alternating current (AC).

Within the Tiggo 8 CSH’s electrical structure, several key components must be maintained for optimal performance, including the high-voltage battery, inverter, electric motor, and Power Control Unit (PCU). To keep the vehicle’s electrical functions in top condition, here are some practical tips for maintaining the Tiggo 8 CSH’s electrical system:

• Regularly check the battery condition to ensure normal voltage levels.
• Make sure connectors and terminals are clean and free from dust or corrosion.
• Avoid overcharging, which can accelerate battery degradation.
• Use certified home or public charging stations.
• Avoid installing non-recommended electrical accessories.
• Ensure the battery cooling system works properly, with smooth fluid circulation and no leaks.

By following these maintenance steps, the Tiggo 8 CSH’s electrical system will remain efficient, safe, and capable of supporting optimal hybrid performance in the long run.

How to Maintain the Cooling and AC System of the Tiggo 8 CSH

In hybrid vehicles like the Chery Tiggo 8 CSH, the cooling system plays a crucial role in maintaining the optimal temperature of both the engine and the high-voltage battery. One of the main advantages of the Tiggo 8 CSH’s AC system lies in its dual cooling system, which is specially designed for electrified vehicles.

The AC system in the Tiggo 8 CSH not only ensures comfortable cabin temperatures but also manages air circulation and coolant flow to stabilize the temperature of electrical components such as the battery and inverter. To prevent damage and maintain the system’s durability, here are several ways to care for the Tiggo 8 CSH’s AC system:

• Use the AC wisely and avoid extreme temperature settings that burden the system.
• Clean the cabin air filter regularly to maintain proper airflow.
• Ensure the refrigerant level is adequate and that there are no leaks.
• Clean the evaporator and air ducts to prevent cooling inefficiency.
• Have the battery cooling system checked at an authorized Chery service center.

By applying these maintenance tips, you can help preserve the performance of the Tiggo 8 CSH’s AC system. A stable cooling system is essential to ensure that both the gasoline engine and electric motor operate under ideal conditions without the risk of overheating. Efficient cooling also helps extend battery life and maintain overall energy efficiency.

Signs of Electrical or Cooling System Problems

Here are several signs that Chery Tiggo 8 CSH owners should watch for as early indicators of issues in the vehicle’s electrical and cooling (AC) systems of the hybrid car:

• Electrical system warning light turns on: If warning icons such as the battery symbol, hybrid system alert, or “check engine” light appear, it may indicate a problem with electrical components such as the high-voltage battery, inverter, or power connectors.
• Reduced acceleration or sluggish power response: When the electric motor isn’t performing optimally, the car may feel heavier during acceleration. This could be due to decreased battery capacity, power control system issues, or inefficient battery cooling.
• Increased energy or fuel consumption: An inefficient electrical system causes the vehicle to rely more on the gasoline engine. As a result, fuel consumption rises, and the EV mode activates less frequently.
• Engine or battery overheating: Overheating is a strong indicator that the cooling system isn’t functioning properly. Possible causes include low coolant levels, poor circulation, or a clogged battery cooling system.
• AC not cooling or making unusual noises: If the cabin temperature remains warm even when the AC is on full power, or if you hear humming or vibrating sounds, it could signal a refrigerant leak or damage to the electric AC compressor.
• Unstable voltage or dim vehicle lights: Dim headlights, infotainment screens, or instrument panels may point to issues in the power distribution system, possibly caused by dirty connectors, a faulty inverter, or unstable battery voltage.
• Hybrid driving mode not activating: If the system cannot switch to EV Mode even when the battery is fully charged, it could mean the Battery Management System (BMS) has detected irregularities in temperature or electrical current.

Read also: How The 3 Driving Modes of Tiggo 8 CSH Work: Eco, Sport, and Normal

Maintaining the electrical system and AC of the Tiggo 8 CSH is not just about comfort, it’s also about efficiency and safety. A well-maintained electrical system helps keep the battery and electric motor performing optimally, while a clean and properly functioning AC maintains ideal temperatures for both the cabin and vehicle components.

Schedule regular inspections of your Tiggo 8 CSH’s electrical and AC systems at the nearest authorized Chery service center to ensure your vehicle always performs at its best. You can learn more about Chery’s service options by visiting chery.co.id.

The safe mode condition can occur unexpectedly in both gasoline and electric vehicles. When your car suddenly loses power or the check engine light appears on the dashboard, it’s likely that your vehicle has entered safe mode.

Safe mode is an automatic protection mode activated by the car’s computer system or ECU when it detects a serious issue with the engine, transmission, or other electronic systems. The purpose of this mode is to protect the vehicle’s components from further damage.

When safe mode is active, the ECU limits engine performance by reducing power, restricting RPM, or disabling certain functions. This situation often leaves drivers feeling panicked and unsure of what to do next.

To help you stay prepared in case your car enters safe mode while driving, here’s what you should do when your vehicle goes into this safety mode.

What to Do When Your Car Enters Safe Mode

Experiencing safe mode while driving can be stressful, especially if it happens on a highway or during a long trip. When your car suddenly loses power, it can disrupt your journey and cause concern. If this happens to you, here’s what you should do when your car goes into safe mode:

1. Stay Calm and Reduce Speed

As soon as your car shows signs of entering safe mode, the first thing you need to do is stay calm and gradually slow down. This mode doesn’t mean your car is completely broken, it’s an automatic protection system designed to prevent the engine from working too hard.

Immediately reduce your speed if your vehicle enters safe mode while on the road, then steer to a safe location before performing any further inspection.

2. Turn Off the Engine for a Few Minutes, Then Restart

Once you’ve stopped in a safe area, turn off the engine for about 5–10 minutes. This allows the ECU system to perform a temporary reset. In some minor cases, such as a brief sensor error, the system may return to normal once the engine is restarted.

3. Check the Indicators and Engine Condition

Pay attention to the dashboard indicators, such as the check engine light, engine temperature, or oil pressure warning. If any of these lights are on, it could indicate a problem within a specific system. Additionally, inspect the physical condition of the engine and make sure there are no unusual noises, burning smells, or smoke coming from the engine bay.

4. Avoid Forcing the Vehicle to Drive Fast

While your car is still in safe mode, avoid pressing the accelerator too hard or driving at high speeds. In this mode, the system limits engine power to protect the engine and transmission. Forcing the car to run faster may worsen the damage to these components.

5. Take the Car to an Authorized Service Center for ECU Diagnostics

The best course of action after ensuring your vehicle is safe is to bring it to an authorized or trusted service center. Technicians will use an ECU scanner to read error codes and accurately identify the source of the issue.

With professional diagnostics, safe mode problems can be resolved quickly. This step is crucial to prevent further damage to the vehicle’s electronic or mechanical systems.

Causes of a Car Entering Safe Mode

There are several factors that can cause a car to enter safe mode while driving. Below are some common reasons why your vehicle might suddenly experience this condition:

Engine Sensor Errors (MAF, O2, Throttle, etc.)

Modern cars are equipped with various sensors that regulate engine performance, such as the Mass Air Flow (MAF) sensor, oxygen sensor, and throttle sensor. If one of these sensors malfunctions or provides inaccurate data, the ECU will detect an irregularity and automatically activate safe mode to prevent further damage.

Overheating

When the engine temperature rises beyond the normal limit, the ECU will reduce engine performance and force the vehicle into safe mode. This allows the cooling system time to lower the temperature and helps prevent serious damage, such as a blown head gasket or a seized piston.

Low Oil Pressure

Engine oil plays a vital role in lubrication and temperature regulation. If oil pressure drops too low, the ECU interprets this as a potential threat to internal engine components. As a result, the system limits engine power and RPM to avoid excessive friction and permanent damage.

Automatic Transmission Problems

In vehicles with automatic transmissions, issues such as abnormal gear shifting, slipping, or unstable transmission fluid pressure can trigger safe mode. The ECU will disable certain transmission functions, allowing the car to continue running safely in a specific gear until repairs are made.

ECU or Electrical System Malfunctions

Faulty ECUs, loose connectors, or unstable electrical currents can cause the system to misread sensor data. When this happens, the ECU activates safe mode as a precautionary measure since it cannot accurately determine the engine’s condition.

Can a Car Still Be Driven When Safe Mode Is Active?

When a car enters safe mode, it can generally still be driven, but only under very limited conditions. The ECU system intentionally reduces engine power and disables certain functions so the driver can safely bring the vehicle to a secure location or the nearest repair shop without causing sudden damage.

However, driving the car for an extended period while in safe mode is highly discouraged. If the vehicle continues to be used without proper repair, the damage may spread to other components such as sensors, the oil pump, or even the ECU itself. Therefore, once the car enters this mode, it’s best to have it inspected at an authorized service center as soon as possible.

Read also: How The 3 Driving Modes of Tiggo 8 CSH Work: Eco, Sport, and Normal

Safe mode in a car functions as an automatic protection system activated by the ECU to prevent more severe damage to the engine or transmission. If your electric car or gasoline-powered vehicle shows signs of entering safe mode, immediately have it inspected at an authorized service center so the cause can be identified and properly repaired.

A car equipped with a safe mode feature plays an important role in preventing further damage. Most modern or newly released vehicles today are already equipped with this technology. For those looking for a modern, high-tech vehicle, you can explore electric or hybrid models at chery.co.id.